Smallest Sig Pistol - In 2014, Sig Sauer released its first polymer pistols: the P320 series. Despite the continued popularity of their hammer-and-metal 220 series guns, the market for polymer guns is growing every year, and it was clear that the future could be tough for Sig—especially with law enforcement sales—unless they have a modern model. striker-fired pistol to compete with Glock, Smith & Wesson and others.
So far, the general reception of the P320 series has been positive, if a little restrained, thanks to Sig's late entry into the market. I got an early look at the Sig P320 at the 2014 SHOT Show when they debuted, but I wasn't able to shoot one until Sig sent me one of this year's new P320 subcompacts in 9mm to evaluate. Lucky Gunner Lounge employee Jim Grant also tested a 9mm P320, but he has the slightly larger compact model. So we decided to team up for what you might call a "double blind" first impression review. We did not discuss our experiences with the P320s before writing these articles, and neither of us read the other's review until both were written. Some of the parallel conclusions we reached may give the impression that we are comparing notes beforehand, but the reviews were written independently.
Smallest Sig Pistol
Compact pistols are the most versatile pistols in the world. Big enough to hold a lot of ammunition and small enough to hide, they are the Swiss Army Knife of the firearms world. The problem most of them have is the volume. Concealment takes effort and the grips are too large for shooters with small hands. Since my doubts fall into both categories, I've never felt comfortable with one. That's why I got so excited when I saw the announcement of the SIG P320, with its dehorned look and ridiculous customization possibilities.
Is The Sig P938 Viable For Concealed Carry?
Other guns of the past with interchangeable backstraps have produced less than impressive results. Because they don't allow for a wide range of sizes to fix the broken ergonomics of pistols whose grips look like 2x4s. So I was pretty skeptical about interchangeable frames until I got my hands on one.
"It fits!" I screamed like Cinderella's prince and finally found her lost love. I can eject magazines, release the slide and fire the gun without having to twist the gun in my hand. Out of curiosity, I tried the small size, which was not uncomfortable at all. I could easily use the P320 with that smaller grip installed, but I found that my support hand would overlap too much with my shooting hand. Although it could just be hands reporting a conflict with my previous muscle memory.
So far I have put about 500 rounds through the gun and my impression of the gun has changed quite a bit. At first I thought the trigger was fine, although certainly better than a factory Glock trigger. Now I feel after a solid break it has one of the best triggers on a polymer frame pistol with a firing pin.
Ergonomics aside, the gun has a slightly above-average caliber height that amplifies felt recoil. In the tested 9mm, this is not a problem, especially if a shooter is using a grip that fits their hands well.
Check Out The Sig Sauer Machine Gun That The U.s. Army Didn't Want
The P320 Compact looks like a cross between a VP9, a Glock 19 and an M&Pc; with the best features of the three. The only add-on I'd like to see available is a frame without a dust cover with rails, or a rail cover for existing ones. I think this would make this gun easier to remove from concealment, although a quality holster can do a lot to remedy this.
Verdict: The P320 rivals or exceeds all major polymer handgun brands in terms of functionality, usability, and accuracy, and I would argue that it has better ergonomics and trigger pull than the vast majority of its competition. Personally, I can't think of a pistol with a better trigger, although the latest Century TP9SA and the H&K VP9 are very close. I wouldn't sell my Glocks to buy the P320, but if I hadn't already invested in Glock pistols, the P320 is a very attractive option.
Since the first P320s hit the market in mid-2014, I've read a few reviews, but didn't really have much personal interest in trying one until the subcompact model was released earlier this year. My everyday carry pistol is a compact Smith & Wesson M&P, and the compact Sig P320 is very similar in size and has the same magazine capacity. There has been some debate as to whether Smith & Wesson made the M&P compact too big or too small, but I've always thought it was the "just right" size for me, so I was very curious to see how the P320 Subcompact compares.
Like the M&P9c, the P320 Subcompact has a built-in 12-round double-stack magazine. I use a little finger extension on all my M&P compact mags because without it my little finger won't fit in the grip. The Sig P320 Subcompact grip is slightly longer and has enough room for me to fit three fingers around the grip, even without the magazine. That said, it's a precarious three-finger grip at best, and I think many shooters will look to an aftermarket pink extension for P320 12-round magazines for a more secure grip.
Sig Sauer P365 Nitron Micro Compact Semi Auto Pistol
When I first picked it up, the P320 Subcompact felt extremely heavy. The portion of the slide and frame that sits over the hand makes it much larger than an M&P or Glock. It's not as obvious on the larger P320 pistols, but with the chunky grip of the subcompact, the slide looks out of proportion.
This may make a small difference in how the rifle is carried in a holster, but seems to have little impact on how the rifle shoots. At distance, the P320 Subcompact offered noticeably less recoil than my M&P9c, which always felt pretty soft for a small 9mm. Yes, the hole height is higher on the P320, but in my experience it's not always the problem, as many people claim it is. The rule of thumb I came up with is that a low bore height is usually indicative of a soft kickback, but a high bore height doesn't necessarily mean the opposite is true.
The trigger of the P320 series is the highlight of the design. Sig's last attempt at the modular polymer gun concept was the P250 double-action hammer action, which is almost cosmetically identical to the P320. The P250 was not received enthusiastically by the market, thanks in part to its long trigger. For many shooters, the advantage of a striker-fired action over a hammer pistol is the ability to have a consistent, manageable trigger without the need for an external safety. The P320 trigger is a shining example of what a trigger pull can be.
The Sig P320 Subcompact (left) is similar in size to the Smith & Wesson M&P9c (right) and slightly larger than the Glock 26/27 (above)
The Null: Sig Sauer P365x & Xl 17 Round Magazine Adapter Sleeve
Compared to a factory Glock, M&P, or XD, the P320 trigger is best described as “crisp” with a short pull. The reset is also short and deliberate, making accurate rapid fire very achievable even with a small pistol like the subcompact model. I measured the pull weight at about 7 pounds on my trigger scale and expect it to get a little lighter as it gets more rounds down.
Overall, I'm impressed with the P320 Subcompact. In fact, if I were to start using it tomorrow, the only thing I would change would be the sights (and maybe the aforementioned extended magazine base path). The gun I received from Sig comes equipped with the useful SigLite night sights, but I always prefer a bright, contrasting color on the front like the Trijicon HDs. Despite being relatively new, the P320 already has significant aftermarket support thanks to the parts it shares with existing P250 pistols.
While my experience with the P320 series has been limited thus far, I feel comfortable saying that if I were starting over tomorrow and hadn't already invested so much in the M&P platform, I'd buy the P320 subcompact. an everyday pistol. with some of his older brothers for local defense and other roles.
Do you own the P320? What are your impressions of the gun? We'd love to hear your thoughts below. The SIG Sauer P230 is a small, semi-automatic pistol chambered in .32 ACP or .380 Auto. It was designed by SIG Sauer of Eckernförde, Germany. It was imported to the United States by SIGARMS in 1985. In 1996
What's The Best 380 Pocket Pistol?
The SIG P230 was designed in 1977 as a concealable forced pistol. After World War II, the West German State Police primarily carried Walther PP and Walther PPK models chambered in .32 ACP, as no 9×19mm pistol was compact or portable enough for concealed carry at the time. However, several terrorist attacks in
Sig insurance, sig questionnaire, stat sig, sig, sig code, sig lite, electronic sig, sig form, sig compliance, smallest, sig assessment, sig document
0 Comments